Steam Generator Systems

Clayton Steam Generator Systems are ideally suited for any steam application as well as for high pressure and superheated steam supplies.

BENEFITS

Clayton Steam Generator Systems

Open, Closed and Semi-Closed Systems

Open Systems

In the Clayton Open System condensate can be returned to an atmospheric Hotwell or pressurised Deaerator. From here boiler water is directed the special Clayton Pump and fed to the Clayton Steam Generator.

Steam flows from the steam separator outlet and the condensate from the separator is recycled. Blowdown is automatic and taken from the sump of the separatoer – this results in very low blowdown loss. The make-up water supply can be passed through a water softener and chemicals are dosed directly into the hotwell or deaerator.

Closed and Semi-closed Systems

Closed and semi-closed systems may be used to make additional energy savings when high pressure condensate is being recovered.

Play Video

Modular Steam System

Take a look at a skid-mounted 3000 kg/h boiler house being delivered as two modules, demonstrating the small space required.

Play Video

HIGH POWER BOILER HOUSE

See inside a high power boiler house containing two automatic, 250 BHP sequence controlled Clayton Steam Generators supplying steam on-demand.

Play Video

Modular Steam System

Take a look at a skid-mounted 3000 kg/h boiler house being delivered as two modules, demonstrating the small space required.

Play Video

HIGH POWER BOILER HOUSE

See inside a high power boiler house containing two automatic, 250 BHP sequence controlled Clayton Steam Generators supplying steam on-demand.

SPECIAL STEAM GENERATOR APPLICATIONS

Power Stations

The Clayton Steam Generator System is ideal for use in both conventional and nuclear power stations. Its safe design, rapid start-up and ability to generate superheated, high pressure steam quickly make it suited to these environments.

Common power station applications include peak shaving, auxiliary start-up steam, back-up and emergency steam supply.

Marine & Offshore Oil

Its safety, space saving design, unmanned operation, reliability and modular construction make Clayton the standard for ships and offshore oil platforms.

The standard Clayton Marine Steam Generator includes specified materials, control systems, electrical motors, cabling, tagging, documentation and other essential features. It is approved by marine authorities and can be adapted to meet the inspection agency requirements.

High Pressure & Superheated Steam

The robust Clayton heating coil is designed to withstand the damaging effects of expansion and contraction during rapid heating and cooling. This makes the Clayton Steam Generator ideal for use in superheated and high pressure applications.

On Superheated Clayton Steam Generators the feedwater is directed to the top layer of coil where it is pre-heated as it spirals downwards and passes into the high efficiency steam separator. Dry steam from the separator is then directed to the integral superheating coil section where the desired steam temperation is produced.

Additional Information

You might also find the following pages useful in your research.